Go back to list

Introduction

This article will show you how to install external devices on POSweb, i.e. card readers or fiscal printers used in the club. To do so, first check the article on the DeviceIntegartor. It is a service used for communication with external devices and to identify a workstation. It enables you to use POSweb and connect your computer with external devices, i.e. fiscal printers, or card printers.

The image below shows the relation between the POSweb, DI and devices. 

Image
f

Before you start

Use these lists of external devices to make sure they would work well with your POSweb station:

Instruction

How to install POSweb external devices?

  1. Open the hardware configuration window on POSweb by clicking on the Settings icon in the right-bottom corner.
  2. In the new window view, you will see the whole POSweb configuration.
  3. If you make any changes in configuration, don't forget to save the configuration and restart DeviceIntegrator.
Image
pos config

 

Image
page 1
Image
page 2
Image
page 3
Image
page 4

How to configure the most commonly used types of external devices?

Read the below articles on POSweb compatible devices and follow the detailed set up instructions: 

Set up of the transaction terminals has to be done by the PreferctGym Team. Please contact us in case of such a need. 

Help us improve the Knowledge Base experience and rate this article!
0.0
No votes have been submitted yet.
Loading...